Hydraulic cylinder tools
From cylinder selection to fault diagnosis, perform all the calculations you need in one place. With every tool, you can transfer your results to a quote request in a single click.
Force calculator
Push and pull force, oil volume, speed and the ISO 3320 bore required for your load.
Open toolRod buckling check
Allowable push force by mounting type, slenderness and the safe minimum rod diameter.
Open toolQuote wizard
Define your cylinder in 5 steps and send a complete quote request in one go.
Open toolOverhaul or new?
Answer a few questions to see whether an overhaul or a new cylinder suits you.
Open toolFault diagnosis guide
Pick a symptom to see possible causes, urgency and first checks.
Open toolPower & line calculator
Pump motor power, hose / port flow velocity and rod-side return flow.
Open toolTelescopic cylinder
Force per stage, total stroke and oil volume; last-stage load check.
Open toolUnit converter
Instant conversion between bar–psi–MPa, kN–tonne–lbf, mm–inch and L/min–GPM.
Open toolWhat does each tool do?
The force calculator determines push-pull force from piston diameter and pressure, while the rod buckling check shows whether the rod diameter is safe for long-stroke cylinders. The power and line calculator sizes the pump motor and hose diameter, and the telescopic cylinder tool calculates the force at each stage.
For your existing cylinder, the fault diagnosis guide identifies the likely causes of symptoms, and the overhaul or replace tool shows the most suitable path. If you need a new cylinder, you can submit all the details in 5 steps with the quote wizard.
Get a quote for your application
Send us your calculated values and application details, and our team will get back to you for new manufacturing or revision work.
Request a Quote